➙ Your iPhone 7 Plus does not hold a charge.
➙ You should charge your iPhone 7 Plus several times a day.
➙ Your iPhone 7 Plus turns off unexpectedly.
➙ Your battery is no longer charging.
Test the battery before complete assembly.
Calibrate the battery directly after assembly.
Do not puncture the used battery when removing it.
Clean the space reserved for the battery thoroughly before positioning the new battery.
➀ Remove your used battery.
➁ Place the new battery inside the iPhone without sticking it and without removing the protections.
➂ Connect the battery to the motherboard.
➃ Connect your screen to the motherboard
➄ Leave your iPhone open and charge the battery up to 100%.
✌ The test is successful if the battery reaches 100%.✌
➀ Completely discharge your battery by using your iPhone until it turns off.
➁ Charge your iPhone up to 100% without turning it on and leave it plugged in for at least 2 more hours.
➂ Unplug the device and turn it on.
➃ Use it normally until it turns itself off again.
✌ Battery calibration is finished.✌
✔ Perform one full charge cycle per month (charging the battery to 100%, then letting it drain completely).
✔ Charge your battery with an original iPhone cable.
✔ Unplug the charging cable when your battery is fully charged.
❌ Charge your iPhone with a non-original cable.
❌ Leave the iPhone charging cable connected while the battery is fully charged.
❌ Leave your iPhone in the sun or in a car with an overheated interior, including in the glove compartment.
Heat is your battery's worst enemy.
☝ Lithium batteries can be recharged at any time. It is not necessary to wait until they are completely discharged, nor to fully charge them for optimal performance. On the contrary, don't wait until your battery is empty to recharge it. For optimal conservation of a lithium battery, it is important not to leave the electrons inactive for too long.
☝ Your iPhone's battery may require software recalibration in order to display autonomy corresponding to the actual charging capacity. In order to recalibrate your battery, simply let your iPhone completely discharge until it turns off, and recharge it to 100%.
☝ Depending on the iOS installed on your iPhone and the model of your iPhone, you may no longer have access to the status of your battery and receive a system message saying that the authenticity of the battery cannot be verified. Apple inserted chips into every iPhone battery starting in 2018. This allows your iPhone to recognize the authenticity of your battery by its serial number paired with the motherboard. Apple wants to force users to repair devices at an Apple authorized center. Original or not, this message is inevitable. This does not interfere with the proper functioning of your iPhone which will have regained all its autonomy thanks to this new battery. This message will disappear after 15 days. To find out more, click here.
Batteries are guaranteed for 2 years as long as they are not used. Kept in good conditions, a battery will not be damaged if it is not used or installed. Electronic spare parts are very fragile products. Simply handling them can damage them. Batteries installed or used will not be returned, exchanged or refunded. It is therefore important to test the battery received before final installation.
